Metal suspension system for lay-in metal planks or similar

Ceiling system 172

System Lay-in tartan grid system for metal planks and
tiles
suitable for Perforated and smooth metal planks and tiles,
individually replaceable
Characteristic Symmetrical layout with butt joints, mock crossing
boxes

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm module size
1.200x1.200 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,70 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,40 pcs*
31/37 Rnonius hanger lower part1,25 mm150 mm100 pcs0,70 pcs*
4PB 100 S
(1,0)
main grid1,00 mm3.700 mm4 pcs0,84 Meter
5ZWwall anchor1,25 mm100 mm100 pcson demand
6PB 100 S2
(1,0)
cross grid, prepared for suspension at both ends
for connection to PB 100 S (1,0)
1,00 mm1.100 mm1 pcs0,77 Meter
7DP 52hold-down perimeter angle trim, pierced0,75 mm3.000 mm60 Meteron demand
81/187hold-down spring0,50 mm50 mm500 pcson demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.