Metal suspension system for large wood fiber panels or similar, lay-in ceiling panels

Ceiling system 108

System Metal suspension system, all exposed parts
white similar to RAL 9010
suitable for Wood fiber panels or similar with kerved and
beveled sides, individually replaceable
Characteristic Panel edges with recessed, closed joints, front
side straight

Components comply with the valid DIN-EN standards.

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm width of ceiling tile A*
415 mm625 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,67 pcs*0,67 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,34 pcs*1,34 pcs*
31/37 C 62nonius hanger lower part1,25 mm122 mm100 pcs0,67 pcs*0,67 pcs*
4DP 16primary runner0,75 mm4.000 mm32 Meter0,80 Meter0,80 Meter
51/104splice0,50 mm110 mm100 pcs0,20 pcs0,20 pcs
6WA 16wall anchor1,00 mm50 mm100 pcson demandon demand
7AS 60connecting bracket0,60 mm40 mm100 pcs1,93 pcs1,29 pcs
8DP 1005z-section1,00 mm5.000 mm50 Meter2,40 Meter1,60 Meter
91/63splice1,00 mm100 mm100 pcs0,48 pcs0,32 pcs
10DP 45shadow edge trim, pierced0,60 mm4.000 mm60 Meteron demandon demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.