Metal suspension system for lay-in metal planks or similar

Ceiling system 165

System Metal suspension system for lay-in metal planks or
similar
suitable for Perforated and smooth metal planks and tiles, individually
replaceable, connection of partition walls
Characteristic Symmetrical layout with butt joints, c-grid with joint
and filler profile

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

Hanger distance (A) at module size (B) 1.200 mm: max. 1.200 mm
Hanger distance (A) at module size (B) 1.500 mm: max. 1.000 mm

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm module size 1.200x1.200 mmquantity per sqm module size 1.500x1.500 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,70 pcs*0,67 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,40 pcs*1,34 pcs*
31/37 Rnonius hanger lower part1,25 mm140 mm100 pcs0,70 pcs*0,67 pcs*
4PBmain grid1,00 mm6.000 mm4 pcs0,84 Meter0,67 Meter
5FPfiller profile as main section0,60 mm6.000 mm4 pcs0,84 Meter0,67 Meter
6ZLsplice1,00 mm120 mm100 pcs0,21 pcs0,17 pcs
7ZWwall anchor1,25 mm100 mm100 pcson demandon demand
8ZKcross connector1,25 mm95 mm100 pcs1,40 pcs0,89 pcs
9PBcross grid1,00 mmon demand1 pcs0,77 Meter0,63 Meter
10PB SCHstamping of c-grid0,69 pcs0,44 pcs
11FPfiller profile as cross section1,00 mmon demand1 pcs0,77 Meter0,63 Meter
12FP SCHcutting of filler profile0,69 pcs0,44 pcs
13DP 52hold-down perimeter angle trim, pierced0,75 mm3.000 mm60 Meteron demandon demand
141/187hold-down spring0,50 mm50 mm500 pcson demandon demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.