Metal hook-on system for metal planks and tiles

Ceiling system 130

System Metal concealed hook-on system
suitable for Metal planks and tiles, each removable
Characteristic Symmetrical layout with butt joints

Components comply with the valid DIN-EN standards.

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm
length of tiles A*
1.200 mm
quantity per sqm
length of tiles A*
1.500 mm
quantity per sqm
length of tiles A*
1.800 mm
quantity per sqm
length of tiles A*
1.800 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,70 pcs*0,70 pcs*0,70 pcs*0,70 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,40 pcs*1,40 pcs*1,40 pcs*1,40 pcs*
31/37 Anonius hanger lower part1,25 mm150 mm100 pcs0,70 pcs*0,70 pcs*0,70 pcs*0,70 pcs*
4AS 20primary angle runner2,00 mm4.000 mm40 Meter0,84 Meter0,84 Meter0,84 Meter0,84 Meter
5AS 25splice2,00 mm150 mm100 pcs0,21 pcs0,21 pcs0,21 pcs0,21 pcs
6AS 30wall connector2,00 mm100 mm100 pcson demandon demandon demandon demand
7AS 10hook-on profile1,25 mm4.000 mm100 pcs0,84 Meter0,67 Meter0,56 Meter0,50 Meter
8AS 15splice1,25 mm100 mm40 Meter0,21 pcs0,17 pcs0,14 pcs0,13 pcs
9AS 45hexagonal boltM620 mm500 pcs1,80 pcs1,65 pcs1,55 pcs1,55 pcs
AS 50nut100 pcs1,80 pcs1,65 pcs1,55 pcs1,55 pcs
AS 55washer1.000 pcs1,80 pcs1,65 pcs1,55 pcs1,55 pcs
10DP 52hold-down perimeter angle trim0,75 mm3.000 mm60 Meteron demandon demandon demandon demand
111/187hold-down spring0,50 mm48 m500 pcson demandon demandon demandon demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.