System 325

Metal suspension system for lay-in mineral fiber tiles or similar

Ceiling system 325

System	Lay-in ceiling system with T-cross sections, for mineral fiber tiles or similar
suitable for	Ceiling tiles with surface finish and different front sides according to manufacturer’s specifications, individually replaceable
Characteristic	Exposed grid with partly recessed, narrow cross joints, different joint widths

Components comply with the valid DIN-EN standards.

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

**Larger module size is possible, see pos. 12

item	order no.	description	thickness	length	packing unit	quantity per sqm module size 1.200x600 mm
1	1/30	nonius hanger upper part	1,00 mm	on demand	100 pcs	0,70 pcs*
2	1/14	safety pin	2,50 mm	60 mm	100 pcs	1,40 pcs*
3	1/37 B	nonius hanger lower part	1,25 mm	120 mm	8 pcs	0,70 pcs*
4	UBP	main bandraster grid	nach Bedarf	on demand	100 pcs	0,84 Meter
5	UBV	splice	1,00 m	200 mm	100 pcs	0,24 pcs
6	BWA	wall anchor	1,00 m	72/92 mm	100 pcs	on demand
7	AT 21 A	t-connector right	1,00 mm	47/49 mm	100 pcs	1,39 pcs
8	AT 21 B	t-connector left	1,00 mm	47/49 mm	100 pcs	1,39 pcs
9	DP 09 LG DP 08 LG DP 33 LG	cross t-section	0,75 mm	on demand	1 pcs	1,39 pcs = 1,75 Meter incl. waste
	DP ST	stamping and slotting system 200	0,75 mm	on demand	1 pcs	1,39 pcs
10		t-connector	1,00 mm	50x50 mm	100 pcs	on demand
11		perimeter angle trim, pierced	0,50 mm	3.000 mm	60 Meter	on demand

item	order no.	code no.	description / surface coating	length	packing unit	quantity
		separate hanger, serie 1/37 L for cross t-sections at module sizes larger than 1.250 mm
12	1/37 L	2690	nonius hanger lower part, galvanised	1,25 mm	185 mm	100 pcs

* We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.