Metal suspension system for lay-in metal planks or similar

Ceiling system 170

System Lay-in tartan grid system for metal planks and
tiles
suitable for Perforated and smooth metal planks and tiles,
individually replaceable
Characteristic Symmetrical layout with butt joints

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm module size 1.200x1.200 mmquantity per sqm module size 1.500x1.500 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,70 pcs*0,67 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,40 pcs*1,34 pcs*
31/37 Rnonius hanger lower part1,25 mm150 mm100 pcs0,70 pcs*0,67 pcs*
4PBmain gridon demandon demand4 pcs0,84 Meter0,67 Meter
5ZLsplice1,25 mm120 mm100 pcs0,21 pcs0,17 pcs
6ZWwall anchor1,25 mm100 mm100 pcson demandon demand
7ZKcross connector1,25 mm95 mm100 pcs1,40 pcs0,89 pcs
8PBcross gridon demandon demand1 pcs0,77 Meter0,63 Meter
9DP 52hold-down perimeter angle trim, pierced0,75 mm3.00060 Meteron demandon demand
101/187hold-down spring0,50 mm50 mm500 pcson demandon demand
11PB SCHstamping of c-grid0,69 pcs0,44 pcs

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.