System 200

Metal suspension system for large wood fiber panels or similar, T-grid system

Ceiling system 200

System	Metal suspension system, all exposed parts similar to RAL 9010 white
suitable for	Wood fiber panels or similar, straight panel edges, kerved or beveled sides, individually replaceable
Characteristic	Closed, partly recessed narrow joints, different combinations of joint widths possible

Components comply with the valid DIN-EN standards.

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

A combination of part 1/85 A

7. together with part 1/83 B
11. is necessary for staggered tile installation.

item	order no.	description	thickness	length	packing unit	quantity per sqm panel size A* + B* 415x1.700 m	quantity per sqm panel size A* + B* 625x2.150 mm
1	1/30	nonius hanger upper part	1,00 mm	on demand	100 pcs	2,01 pcs	1,34 pcs
2	1/14	safety pin	2,50 mm	60 mm	100 pcs	4,02 Meter	2,68 Meter
3	1/37 L	nonius hanger lower part	1,25 mm	185 mm	100 pcs	2,01 pcs	1,34 pcs
4	DP 09 L DP 08 L DP 33 L	main t-section	0,75 mm	5.000 m	50 Meter	2,41 Meter	1,60 Meter
5	1/84	splice	1,00 mm	100 mm	100 pcs	0,48 pcs	0,32 pcs
6	1/82	t-connector	1,00 mm	50x50 mm	100 pcs	on demand	on demand
7	1/85 A	cross connector part A	1,00 mm	50x50 mm	100 pcs	1,42 pcs	0,75 pcs
8	1/85 B	cross connector part B	1,00 mm	48x57 mm	1 pcs	1,42 pcs	0,75 pcs
9	DP 09 LG	cross t-section	0,75 mm	on demand	1 pcs	1,42 pcs 0,417 Meter incl. waste	0,75 pcs 0,625 Meter incl. waste
	DP 08 LG		0,75 mm		1 pcs
	DP 33 LG		0,75 mm		1 pcs
	DP 35 LG		0,50 mm		1 pcs
	DP 36 LG		0,50 mm		1 pcs
	DP ST	stamping and slotting system 200				1,42 pcs	0,75 pcs
10	DP 45	shadow edge trim, pierced	0,60 mm	4.000 mm	60 Meter	on demand	on demand

item	order no.	code no.	description / surface coating	thickness	length	packing unit
11	1/83 A	2785	t-connector, galvanised, right hand part	1,00 mm	47x47 mm	100 pcs
	1/83 B	2786	t-connector, galvanised, left hand part	1,00 mm	47x47 mm	100 pcs
	1/83	2776	t-connector, galvanised	1,00 mm	47x47 mm	100 pcs
12	DP 32	6525	edge profile, galvanised	0,75 mm	5.000 mm	50 Meter
	DP 32 L	65269	coil coated white similar to RAL 9010
		6527	powder coated black similar to RAL 9011
13	DP 16	2112	primary runner, perforated, especially for stiffening of wood-fiber-acoustic-panels, galvanised	0,75 mm	4.000 mm	32 Meter

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.