System 180

Clip-in suspension system for metal tiles or similar

Ceiling system 180

System	Concealed clip-in suspension system with DP 12 primary runner
suitable for	Clip-in metal tiles, various sizes
Characteristic	Smooth ceiling surface or perforation pattern of tile manufacturer, also suitable for beveled tiles

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

item	order no.	description	thickness	length	packing unit	quantity per sqm length of tiles 600 mm	quantity per sqm length of tiles 625 mm
1	1/30	nonius hanger upper part	1,00 mm	on demand	100 pcs	0,70 pcs*	0,70 pcs*
2	1/14	safety pin	2,50 mm	60 mm	100 pcs	1,40 pcs*	1,40 pcs*
3	1/37 E	nonius hanger lower part	1,25 mm	190 mm	100 pcs	0,70 pcs*	0,70 pcs*
4	DP 12	primar y/main clip-in section	0,60 mm	4.000 mm	40 Meter	2,51 Meter	2,44 Meter
5	1/70	splice	0,50 mm	100 mm	100 pcs	0,63 pcs	0,61 pcs
6	1/79	wall connecting bracket	1,25 mm	35 mm	100 pcs	on demand	on demand
7	1/87	primar y/secondary runner bracket	1,00 mm	30 mm	100 pcs	1,39 pcs	1,28 pcs
8	DP 52	hold-down perimeter angle trim, pierced	0,75 mm	3.000 mm	60 Meter	on demand	on demand
9	1/187	hold-down spring	0,50 mm	50 mm	500 pcs	on demand	on demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.