Clip-in suspension system for metal planks and tiles

Ceiling system 410

System Partially concealed clip-in system for metal
planks and tiles
suitable for Perforated and smooth metal planks and tiles,
each removable
Characteristic Symmetrical layout with continous 3 or 5 mm
joint in one direction

Components comply with the valid DIN-EN standards.

Quantities are estimated based on large ceiling areas. Modules connecting to walls are not considered in this statement. For smaller rooms the requirement of material can be considerably higher. Distances to be agreed with panel manufacturer. No responsibility is taken for this statement.

itemorder no.descriptionthicknesslengthpacking unitquantity per sqm length of tiles A*
1.200 mm
quantity per sqm length of tiles A*
1.500 mm
quantity per sqm length of tiles A*
1.800 mm
quantity per sqm length of tiles A*
2.000 mm
11/30nonius hanger upper part1,00 mmon demand100 pcs0,70 pcs*0,70 pcs*0,70 pcs*0,70 pcs*
21/14safety pin2,50 mm60 mm100 pcs1,40 pcs*1,40 pcs*1,40 pcs*1,40 pcs*
31/37 C 62nonius hanger lower part1,25 mm122 mm100 pcs0,70 pcs*0,70 pcs*0,70 pcs*0,70 pcs*
4DP 16primary runner0,40/1,25 mm4.000 mm32 Meter1,26 Meter0,84 Meter0,84 Meter0,84 Meter
51/104splice0,40/1,25 mm110 mm100 pcs0,33 pcs0,21 pcs0,21 pcs0,21 pcs
6WA 16wall anchor0,40/1,25 mm50 mm100 pcson demandon demandon demandon demand
7K 406suspension bracket0,50/1,00 mm93 mm100 pcs1,39 pcs1,12 pcs0,93 pcs0,84 pcs
8K 455double sided clip-in profile0,50 mm5.000 mm35 Meter0,84 Meter0,67 Meter0,56 Meter0,50 Meter
9K 470splice0,60 mm100 mm100 pcs0,09 pcs0,07 pcs0,06 pcs0,05 pcs
10DP 51f-shaped shadow edge trim1,50 mm5.000 mm50 Meteron demandon demandon demandon demand

*We recommend at least one hanger per 1,5 sqm ceiling area.

We are looking forward to your challenge!

You can contact us via telephone, e-mail or contact form in order to get personal consultation and an individual offer.